[Level and health evaluation of rare earth elements in human blood and hair in the mining areas in Northwest Hubei].

OBJECTIVE: To investigate the content of rare earth elements(REs)in blood and hair of residents in a RE mining area in Northwest Hubei, and evaluate the impact of REs on the health status of local residents. METHODS: A total of 191 residents from the core area of RE mining areas and 186 residents from non RE mining areas, aged 20-69, were selected. The content of REs in the blood and hair of the survey subjects was measured using inductively coupled plasma mass spectrometry, and compared with existing literature values. At the same time, blood tests and questionnaire surveys will be conducted on the health status of residents to examine whether human RE enrichment can lead to endemic diseases. RESULTS: The average total content of REs in the blood of residents in the mining area was 60.22 ng/mL, which was 3.35 times that of the control area; The average total content of REs in hair was 1197.91 ng/g, which was 6.32 times higher than the control area. As age increasing, the abundance of REs in the blood and hair of both men and women in mining areas increased. The proportion of Yttrium and Scandium in the blood and hair were much higher than that in the soil. Compared to hair, Yttrium and Scandium were more easily enriched in the blood. There was no significant difference in the probability of fatty liver, hepatitis B, hypoglycemia, hypotension, hypertension and heart disease and the average life span between residents in RE mining areas and those in the control area. CONCLUSION: The high daily average dietary intake of REs in residents leads to a relatively large accumulation of REs in human blood and hair, but no significant and substantial human health damage has been found at present.

Toxicokinetic study of scandium oxide in rats.

Canada has recently invested in the large-scale exploitation of scandium oxide. However, there are no studies available to date to understand its toxicokinetics in the animal or human body, which is necessary to assess exposure and health risks. The aim of this research was to investigate the toxicokinetics of absorbed scandium oxide (Sc2O3) using the rat as an experimental model. Male Sprague-Dawley rats were injected intravenously with 0.3 or 1 mg Sc2O3/kg body weight (bw). Blood and excreta (urine and feces) were collected sequentially during a 21-day period, and main organs (liver, spleen, lungs, kidneys, brain) were withdrawn at sacrifice on day 21. Inductively coupled plasma-mass spectrometry (ICP-MS) was used for the measurement of Sc element in the different samples. The mean residence time (MRTIV) calculated from the blood profile was 19.7 ± 5.9 h and 43.4 ± 24.6 h at the lower and higher doses, respectively. Highest tissue levels of Sc were found in the lungs and liver; respective lung values of 10.6 ± 6.2% and 3.4 ± 2.3% of the Sc dose were observed at the time of sacrifice while liver levels represented 8.9 ± 6.4% and 4.6 ± 1.1%. Elimination of Sc from the body was not complete after 21 days. Cumulative fecal excretion over the 21-day collection period represented 12.3 ± 1.3% and 5.9 ± 1.0% of the lower and higher Sc doses, respectively, and showed a significant effect of the dose on the excretion; only a small fraction of the Sc dose was recovered in urine (0.025 ± 0.016% and 0.011 ± 0.004% in total, respectively). In addition to an effect of the dose on the toxicokinetics, results highlight the importance of the lung as a site of accumulation and retention of Sc2O3, which raises the question of the risks of effects related to respiratory exposure in workers. The results also question the relevance of urine as a matrix for biological exposure monitoring. A more in-depth inhalation toxicokinetic study would be necessary.

Effects of Er: YAG, Er,Cr: YSGG, and Nd: YAG laser irradiation and adhesive systems on the immediate and long-term bond strength of dentin: a systematic review and meta-analysis.

At present, lasers are increasingly used in the oral clinical field, and research and applications in dental hard tissue treatment are also increasing. The effect of laser etching dentin on the bonding strength of composite resin reported in the literature is still inconclusive. The purpose of this review was to evaluate whether laser etching can improve the immediate and long-term bonding strength of dentin and investigate the effect of different types of adhesives on the bonding strength of dentin. Two reviewers performed a literature search up from January 2012 to November 2021 in four databases: MEDLINE (PubMed), Web of Science, EMBASE, and the Cochrane Library. A total of 25 studies were included in the meta-analysis. The Cochrane Collaboration Bias Risk Assessment tool was used to evaluate the quality of the included literature, and an analysis was carried out using Review Manager Software version 5.3. The aging bond strength of dentin after erbium (Er): yttrium aluminum garnet (YAG) laser treatment was significantly lower than that of dentin in the bur group (P < 0.00001). At the same time, the bond strength of dentin immediately and aging after (Er), chromium-doped (Cr): yttrium scandium gallium garnet (YSGG) laser treatment was lower than that of dentin in the bur group (P < 0.05). There was no significant difference in the immediate and aging bonding strength among samples in the Er: YAG laser, Er, Cr: YSGG laser, and blank control groups (no laser or bur). The aging bond strength of samples after neodymium-doped (Nd): YAG laser treatment was higher than that of samples in the blank control group (P < 0.05); in addition, the performance of self-etching adhesive was slightly better than that of acid etching adhesive. Regardless of the applied surface treatment and the adhesive employed, dentin after aging showed significant bond degradation (P < 0.05). There was high heterogeneity of bond strength between different groups, and the small number of studies and the contradictory results may be the main reasons for this outcome.

Immunochromatographic Assay based on Sc-TCPP 3D MOF for the rapid detection of imidacloprid in food samples.

In this work, a highly sensitive immunochromatographic test strip (ITS) based on Scandium-Tetrakis (4-carboxyphenyl) porphyrin (TCPP) metal-organic framework nanocubes (ScTMNs) was developed for ultrasensitive and facile visual determination of imidacloprid (IDP). TCPP as the porphyrin-based planar ligand and Sc3+ as the metal center were applied to form the ScTMNs via coordination chelation. Giving the credit to its excellent optical characteristics, strong affinity with monoclonal antibodies, and favorable biocompatibility, the ScTMNs was selected as a signal tag. Under optimized conditions, the ITS exhibited a great liner relationship in the range of 0.04-3 ng/mL and the detection limit was 0.04 ng/mL for the IDP detection. Additionally, IDP was successfully detected in tomatoes, millet, corn and carrot samples with satisfied recoveries. To the best of our knowledge, this is the first time that ScTMNs have been used in immunochromatography which are expected to have potential applications in detection of other substances.

Impact of prompt gamma emission of 44Sc on quantification in preclinical and clinical PET systems.

44Sc is an increasingly investigated positron emitter for use in positron emission tomography (PET) imaging. However, 44Sc is a non-pure positron emitter, since prompt photons are co-emitted during the decay process. This study investigates coincidence energy spectra of 44Sc and its impact on PET quantification on a preclinical and clinical PET system in comparison with 18F. The raw data of the coincidence events revealed characteristic differences comparing the photon energy distribution of 44Sc and 18F. Due to prompt gamma emission of 44Sc, activity recovery is underestimated on PET systems. However, clinical PET imaging of 44Sc with acceptable quantitative accuracy appears feasible by using a single, constant correction factor.

Synthesis of chitosan-acrylic acid/multiwalled carbon nanotubes composite for theranostic 47Sc separation from neutron irradiated titanium target.

A simple and efficient separation method of carrier-free 47Sc from neutron irradiated titanium target using a novel chitosan-acrylic acid/multiwalled carbon nanotubes (CS-AA/MWCNTs) composite was established. The synthesis of the CS-AA/MWCNTs composite was achieved using gamma radiation-induced template polymerization. The grafting efficiency (GE%) of AA on CS onto the surface of f-MWCNTs reached a maximum of~84% under the optimized conditions (30 wt% CS, 1.0 wt% AA, 0.15 wt% f-MWCNTs, >0.2 wt% N,N'-Methylenebisacrylamide (NMBA), and irradiation dose ~25 kGy). Different analyses (FT-IR, SEM, TGA and DTA) were examined for confirming the structural morphology and mechanical properties of the new synthesized composite. Interestingly, the CS-AA/MWCNTs composite depicted a selective adsorption of Sc(III) rather than Ti(IV) ions at pH 5 with adsorption efficiency of ~93.93%. The ionic exchange separation of no-carrier-added (NCA)47Sc(III) from irradiated TiO2 target on CS-AA/MWCNTs composite packed column efficiently eluted 47Sc(III) by 91 ± 0.8% using 1 M HCl solution. The quality control tests (radionuclidic, radiochemical, and chemical purities) for the eluted 47Sc(III) clarified its high purity and validity for cancer theranostics.

Scandium, yttrium, and lanthanide contents in soil from Serbia and their accumulation in the mushroom Macrolepiota procera (Scop.) Singer.

The mobility (fractionation) of rare earth elements (REEs) and their possible impacts on ecosystems are still relatively unknown. Soil samples were collected from two sites in central Serbia, an unpolluted mountain region (site 1) and a forest near a city (site 2). In order to investigate REE fractions (acid-soluble/exchangeable, reducible, oxidizable, and residual) in soils, BCR sequential extraction was performed. Additionally, the content of REEs was also determined in stipes and caps of the mushroom Macrolepiota procera, growing in the observed sites. Sc, Y, and lanthanide contents were determined by inductively coupled plasma mass spectrometry (ICP-MS), and results were subjected to multivariate data analysis. Application of pattern recognition technique revealed the existence of two distinguished clusters belonging to different geographical sites and determined by greater levels of Sc, Y, and lanthanides in Goc soil compared to Trstenik soil. Additionally, PCA analysis showed that REEs in soil were concentrated in two groups: the first consisted of elements belonging to light REEs and the second contained heavy REEs. These results suggest that the distribution of REEs in soils could indicate the geographical origin and type of soil. The bioconcentration factors and translocation factors for each REE were also calculated. This study provides baseline data on the rare earth element levels in the wild edible mushroom M. procera, growing in Serbia. In terms of bioconcentration and bioexclusion concept, Sc, Y, and REEs were bioexcluded in M. procera for both studied sites.

Toenail mineral concentration and risk of esophageal squamous cell carcinoma, results from the Golestan Cohort Study.

Studies conducted in China linked selenium deficiency to higher risk of esophageal squamous cell carcinoma (ESCC), but this has not been widely tested outside that selenium-deficient region. The aim of this study was to investigate the association between selenium and other mineral concentrations in toenails and risk of ESCC in a region with high incidence rates. In this nested case-control study, we identified 222 cases of ESCC from the Golestan Cohort Study, Iran, which has followed up 50,045 participants since enrollment (2004-2008). We randomly selected one control for each case matched by age and sex, using incidence density sampling. We used toenail samples collected at baseline to measure the concentration of selenium, zinc, chromium, mercury, and scandium using instrumental neutron activation analysis. Multivariate adjusted logistic regression models were used to estimate odds ratios (OR) and 95% confidence intervals. Median nail selenium, zinc, chromium, and mercury levels were 1.01, 74.59, 0.77, and 0.018 µg/g in cases and 1.02, 75.71, 0.71, and 0.023 µg/g in controls, respectively. The adjusted odds ratios comparing each fourth quartile of mineral status versus the first quartile were as follows: selenium = 0.78 (95% CI, 0.41-1.49); zinc=0.80 (95% CI, 0.42-1.53); chromium = 0.91 (95% CI, 0.46-1.80); and mercury=0.61 (95% CI, 0.27-1.38), and all trend tests were non-significant. The nail selenium concentration in our controls reflects relatively high selenium status. No evidence of association between selenium or chromium concentrations in toenails and the risk of ESCC was detected in this population.

Standardisation and precise determination of the half-life of (44)Sc.

The half-life of the positron-emitter (44)Sc has been determined by following the decay rate with two measurement systems; an Ionisation Chamber and a HPGe detector. The combination of seven results gives a value of T1/2=4.042 (25)h, about 2% higher than the recommended value of T1/2=3.97 (4)h (Browne, 2011) and with a lower uncertainty. This radionuclide has also been standardised by coincidence counting, and liquid scintillation counting techniques. A (44)Ti/(44)Sc generator developed at CIEMAT was used to obtain the (44)Sc solutions used in all measurements.

In the presence of fluoride, free Sc³âº is not a good predictor of Sc bioaccumulation by two unicellular algae: possible role of fluoro-complexes.

We investigated the effect of fluoride complexation on scandium accumulation by two unicellular algae, Chlamydomonas reinhardtii and Pseudokirchneriella subcapitata. This trivalent metal was selected for its chemical similarities with aluminum and for its convenient radioisotope (Sc-46), which can be used as a tracer in short-term bioaccumulation studies. Scandium surface-bound concentrations (Sc(ads)) and uptake fluxes (J(int)) were estimated in the two algae over short-term (<1 h) exposures at pH 5 and in the presence of 0 to 40 µM F(-). Although the computed proportion of dissolved Sc(3+) dropped from 20% to 0.01% over this [F(-)] range, Sc(ads) and J(int) values for both algae decreased only slightly, suggesting a participation of Sc fluoro-complexes in both processes. Surface adsorption and uptake of fluoride complexes with aluminum have been reported in the literature. These observations are not taken into account by current models for trace metal bioaccumulation (e.g., the biotic ligand model). Results from a previous study, where the effects of pH on Sc uptake were investigated, suggested that Sc hydroxo-complexes were internalized by C. reinhardtii. There is thus growing evidence that the free ion concentration may not be adequate to predict the accumulation of Sc (and potentially of other trivalent metals) in aquatic organisms.

Determination of scandium in acid mine drainage by ICP-OES with flow injection on-line preconcentration using oxidized multiwalled carbon nanotubes.

An on-line scandium preconcentration and determination system implemented with inductively coupled plasma optical emission spectrometry associated with flow injection was studied. Trace amounts of scandium were preconcentrated by sorption on a minicolumn packed with oxidized multiwalled carbon nanotubes, at pH 1.5. The retained analyte was removed from the minicolumn with 30% (v/v) nitric acid. A total enrichment factor of 225-fold was obtained within a preconcentration time of 300 s (for a 25 mL sample volume). The overall time required for preconcentration and elution of 25 mL of sample was about 6 min; the throughput was about 10 samples per hour. The value of the detection limit was 4 ng L(-1) and the precision for 10 replicate determinations at 100 ng L(-1) Sc level was 5% relative standard deviation, calculated from the peak heights obtained. The calibration graph using the preconcentration system was linear with a correlation coefficient of 0.9996 at levels near the detection limits up to at least 10 mg L(-1). After optimization, the method was successfully applied to the determination of Sc in an acid drainage from an abandoned mine located in the province of San Luis, Argentina.

Improving sensitivity and resolution of MQMAS spectra: a 45Sc-NMR case study of scandium sulphate pentahydrate.

To efficiently obtain multiple-quantum magic-angle spinning (MQMAS) spectra of the nuclide 45Sc (I=7/2), we have combined several previously suggested techniques to enhance the signal-to-noise ratio and to improve spectral resolution for the test sample, scandium sulphate pentahydrate (ScSPH). Whereas the 45Sc-3QMAS spectrum of ScSPH does not offer sufficient resolution to clearly distinguish between the 3 scandium sites present in the crystal structure, these sites are well-resolved in the 5QMAS spectrum. The loss of sensitivity incurred by using MQMAS with 5Q coherence order is partly compensated for by using fast-amplitude modulated (FAM) sequences to improve the efficiency of both 5Q coherence excitation and conversion. Also, heteronuclear decoupling is employed to minimise dephasing of the 45Sc signal during the 5Q evolution period due to dipolar couplings with the water protons in the ScSPH sample. Application of multi-pulse decoupling schemes such as TPPM and SPINAL results in improved sensitivity and resolution in the F(1) (isotropic) dimension of the 5QMAS spectrum, the best results being achieved with the recently suggested SW(f)-TPPM sequence. By numerical fitting of the 45Sc-NMR spectra of ScSPH from 3QMAS, 5QMAS and single-quantum MAS at magnetic fields B(0)=9.4 T and 17.6 T, the isotropic chemical shift delta(iso), the quadrupolar coupling constant chi, and the asymmetry parameter eta were obtained. Averaging over all experiments, the NMR parameters determined for the 3 scandium sites, designated (a), (b) and (c) are: delta(iso)(a)=-15.5+/-0.5 ppm, chi(a)=5.60+/-0.10 MHz, eta(a)=0.06+/-0.05; delta(iso)(b)=-12.9+/-0.5 ppm, chi(b)=4.50+/-0.10 MHz, eta(b)=1.00+/-0.00; and delta(iso)(c)=-4.7+/-0.2 ppm, chi(c)=4.55+/-0.05 MHz, eta(c)=0.50+/-0.02. The NMR scandium species were assigned to the independent crystallographic sites by evaluating their experimental response to proton decoupling, and by density functional theory (DFT) calculations using the PAW and GIPAW approaches, in the following way: Sc(1) to (c), Sc(2) to (a), and Sc(3) to (b). The need to compute NMR parameters using an energy-optimised crystal structure is once again demonstrated.

A soil sampling intercomparison exercise for the ALMERA network.

Soil sampling and analysis for radionuclides after an accidental or routine release is a key factor for the dose calculation to members of the public, and for the establishment of possible countermeasures. The IAEA organized for selected laboratories of the ALMERA (Analytical Laboratories for the Measurement of Environmental Radioactivity) network a Soil Sampling Intercomparison Exercise (IAEA/SIE/01) with the objective of comparing soil sampling procedures used by different laboratories. The ALMERA network is a world-wide network of analytical laboratories located in IAEA member states capable of providing reliable and timely analysis of environmental samples in the event of an accidental or intentional release of radioactivity. Ten ALMERA laboratories were selected to participate in the sampling exercise. The soil sampling intercomparison exercise took place in November 2005 in an agricultural area qualified as a "reference site", aimed at assessing the uncertainties associated with soil sampling in agricultural, semi-natural, urban and contaminated environments and suitable for performing sampling intercomparison. In this paper, the laboratories sampling performance were evaluated.

Trace elements in stream bed sediments from agricultural catchments (Gascogne region, S-W France): where do they come from?

The Gascogne region (SW of France) is cultivated for more than 75% of the area. 83 samples of stream bed sediments were collected in three main Gascogne river basins (Gers, Save and Touch, left tributaries of the Garonne river) to evaluate the impact of agricultural practices on trace elements behavior. Eight potential harmful elements (PHE) (Cr, Co, Ni, Cu, Zn, As, Cd and Pb), four reference elements for normalization (Sc, Cs, Al and Fe) and four major elements (Mn, Ca, Mg and P) were considered. The average trace element concentrations in the fine fractions (<63 microm) are in the decreasing order: Zn>Cr>Ni>Pb>Cu>Co>As>Sc>Cs>Cd. Geochemical investigations and an original approach combining regression analysis and chemical sequential extraction allowed to select the most adequate reference material (regional molasse) and reference element (Cs) for normalization procedure. The enrichment factor (EF) is generally lower than 2.5, particularly for Cr, Ni, Cu, As, Zn; however, 23% of the sampling stations are more contaminated (2.5

Estimation of uncertainty arising from different soil sampling devices: the use of variogram parameters.

In the frame of the international SOILSAMP project, funded and coordinated by the National Environmental Protection Agency of Italy (APAT), uncertainties due to field soil sampling were assessed. Three different sampling devices were applied in an agricultural area using the same sampling protocol. Cr, Sc and Zn mass fractions in the collected soil samples were measured by k(0)-instrumental neutron activation analysis (k(0)-INAA). For each element-device combination the experimental variograms were calculated using geostatistical tools. The variogram parameters were used to estimate the standard uncertainty arising from sampling. The sampling component represents the dominant contribution of the measurement uncertainty with a sampling uncertainty to measurement uncertainty ratio ranging between 0.6 and 0.9. The approach based on the use of variogram parameters leads to uncertainty values of the sampling component in agreement with those estimated by replicate sampling approach.

Construction of monoenergetic neutron calibration fields using 45Sc(p, n)45Ti reaction at JAEA.

The 8 and 27 keV monoenergetic neutron calibration fields have been developed by using (45)Sc(p, n)(45)Ti reaction. Protons from a 4-MV Pelletron accelerator are used to bombard a thin scandium target evaporated onto a platinum disc. The proton energies are finely adjusted to the resonance to generate the 8 and 27 keV neutrons by applying a high voltage to the target assemblies. The neutron energies were measured using the time-of-flight method with a lithium glass scintillation detector. The neutron fluences at a calibration point located at 50 cm from the target were evaluated using Bonner spheres. A long counter was placed at 2.2 m from the target and at 60 degrees to the direction of the proton beam in order to monitor the fluence at the calibration point. Fluence and dose equivalent rates at the calibration point are sufficient to calibrate many types of the neutron survey metres.

[Determination of ten trace rare earth elements in the sample by atomic emission spectrometry].

This paper describes the determination of trace La, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Yb and Lu in the sample, using carbon powder, potassium sulfate, barium sulfate, strontium sulfate, and scandium chloride as buffer, by atomic emission spectrometry (AES). Scandium was selected as internal standard line. Sample separation and chemical treatment were not required. The sample was directly loaded into ordinary electrode. The method is simple, rapid and accurate. The determination requirement and influence factors were studied. A new method was developed for the determination of ten rare earth elements, for which the detection limit is smaller than 0.030%, and the range of the recovery is 94%-105%. The results of these elements in standard sample are in agreement with certified values, and the RSD is smaller than 5% (n = 9). The method has been applied to the determination of ten rare earth elements with satisfactory results.

Increasing atmospheric antimony contamination in the northern hemisphere: snow and ice evidence from Devon Island, Arctic Canada.

Adopting recently developed clean laboratory techniques, antimony (Sb) and scandium (Sc) deposition were measured in a 63.72 m-long ice core (1842-1996) and a 5 m deep snow pit (1994-2004) collected on Devon Island, Canadian High Arctic. Antimony concentrations ranged from 0.07 to 108 pg g(-1) with a median of 0.98 pg g(-1)(N= 510). Scandium, used as a conservative reference element, revealed that dust inputs were effectively constant during the last 160 years. The atmospheric Sb signal preserved in the ice core reflects contamination from industrialisation, the economic boom which followed WWII, as well as the comparatively recent introduction of flue gas filter technologies and emission reduction efforts. Natural contributions to the total Sb inventory are negligible, meaning that anthropogenic emissions have dominated atmospheric Sb deposition throughout the entire period. The seasonal resolution of the snow pit showed that aerosols deposited during the Arctic winter, when air masses are derived mainly from Eurasia, show the greatest Sb concentrations. Deposition during summer, when air masses come mainly from North America, is still enriched in Sb, but less so. Snow and ice provide unambiguous evidence that enrichments of Sb in Arctic air have increased 50% during the past three decades, with two-thirds being deposited during winter. Most Sb is produced in Asia, primarily from Sb sulfides such as stibnite (Sb2S3), but also as a by-product of lead and copper smelting. In addition there is a growing worldwide use of Sb in automobile brake pads, plastics and flame retardants. In contrast to Pb which has gone into decline during the same interval because of the gradual elimination of gasoline lead additives, the enrichments of Sb have been increasing and today clearly exceed those of Pb. Given that the toxicity of Sb is comparable to that of Pb, Sb has now replaced Pb in the rank of potentially toxic trace metals in the Arctic atmosphere.

Natural abundance of Sb and Sc in pristine groundwaters, Springwater Township, Ontario, Canada, and implications for tracing contamination from landfill leachates.

Using ICP-SMS and the clean lab methods and procedures developed for determining trace element concentrations in polar snow and ice, a lower limit of detection (LOD) of 30 pg l(-1) for Sb and 5 pg l(-1) for Sc was achieved, allowing the natural abundances of Sb and Sc to be measured in pristine groundwaters. Water samples were collected from natural flows and wells between Elmvale and Wyevale in Springwater Township, Ontario, Canada. The water in this region is derived from chemical reactions between meteoric fluids and the Quaternary sediments which cover the bedrock (dolomitic limestone) to depths of more than 100 m. The chemical composition of these waters (pH 8) is primarily a reflection of reactions between the percolating fluids with calcite and dolomite. The maximum concentration of Sb was 5.0 ng l(-1), and the average of all samples collected was 2.2 +/- 1.2 ng l(-1) (n = 34). The average concentration of Sc was 8.6 +/- 4.7 ng l(-1) (n = 28). The paucity of published Sb concentration data available for comparison is probably because most of the analytical methods commonly used to date, including GFAAS, HG-AAS, HG-AFS, INAA, and ICP-QMS, have lower limits of detection which are inadequate for reliably determining the natural abundance of Sb in many uncontaminated groundwaters. Also, the measurement of extremely low concentrations of Sb requires extra care to avoid possible contamination. Given the extensive use of Sb in plastics, we show that some of the containers used to collect and store samples, and for handling and preparing samples for chemical analyses, may be important sources of contamination in the laboratory. The Sb and Sc concentrations reported here should serve as reference values for this region, against which contamination by various human impacts in future could be compared.

Formation constants of chromium(III), scandium(III) and yttrium(III) complexes of some hydroxy naphthoic acids.

The complexes of chromium(III), scandium(III) and yttrium(III) formed by 1-hydroxy-2-naphthoic acid (1,2-HNA: H2L) and 3-hydroxy-2-naphthoic acid (3,2-HNA: H2L) were investigated by potentiometry and spectroscopy at 25+/-0.1 degrees C and at an ionic strength of 0.1 M KNO3 in 50% ethanol-water (v/v) medium. The stoichiometries of these three M(III) complexes formed with these hydroxy-naphthoic acids and with hydroxo ion were defined and their formation constants were determined and compared. Thus, the removing capacities of these ligands could be examined by calculating the equilibrium concentration of Cr(III) that exists in the discharge water of various industries since Cr(III) ions are the main pollutants present during waste water treatment in our city, Bursa.